Processing your local water to assist the gas boiler
Processing your local water to assist the gas boiler
There are several products that serve as auxiliary items for your central heating system so that it operates normally, and then there are those that work independently to give you the service you want. In either case, your system will be well-prepared to work efficiently if you take the time to maintain it. The Government and environmental agencies repeatedly tell us about the ways to conserve energy like switching off the lights and appliances when not in use, re-adjusting the temperature of the room and washing machine according to the needs, and not leaving any electrical device in the standby mode. These environmentally conscious steps not only save the greenery on our planet, but also save the pound notes in our wallet. Are you paying the same attention to your central heating system? The heating system is also prone to reduced efficiency caused by corrosion, limescale formation and gunk buildup.
To prevent a mass of gunk and limescale from building up in your system, especially where the water is hard, you must try water treatment.
The term water treatment encompasses many different remedies for the protection of your system. Many types of water treatment products such as scale reducers and inhibitors, magnetic and electronic anti-lime mechanisms, sludge destroyers, noise reducers and anti-freeze can be used for water treatment.
If you are living in UK, you should first ascertain the hardness of the water you are getting. If you are living in hard water region, then you will be more susceptible to limescale attacks; you can notice deposits in your kettle, tap and shower head. Limescale reduces efficiency and adds to heating bills. Just a small, thin layer of scale in your hot water cylinder can increase your fuel bills by as much as forty percent. Limescale deposits are simply composed of calcium. If you live in a soft water region, then you need not worry about limescale that much; however, if you are uncertain about the water quality, then without any faltering seek advice.
Water treatment products act by modifying the water borne salts and preventing harmful reactions. Some will change one structure for another, others remove the offending structure and another will stop them from being able to make a solid leaving them in suspension.
The outlook for possible corrosion can be determined by monitoring pH and salt levels as well as ionic conditions, using standard chemical testing kits.
First, you must ensure that your system has been installed by a competent person just knowing that you must never directly connect aluminium to copper or brass because simply by connecting different metals can start a reaction which causes corrosion. You must get your gas connections done by a person registered with CORGI as the law requires this.
Don’t rush in to making a decision, always carefully consider what type of water treatment you need with your particular system. Before using a water treatment remedy on your present system, ensure that the entire heating system is completely flushed out.
Products added to the mains supply can soften hard water and improve the quality of water for domestic use, but they do not prevent or remedy deterioration of the central heating system. You will be able to make lather with detergents and soaps more easily but your heating system will still have problems with efficiency.
Limescale formation, acidic corrosion and bio-chemical gunk are the main causes of heating system damage.
Corrosion can start from the moment the system is set up and filled with water from the mains supply. Due to corrosion sludge is produced, which in its turn creates cold spots in the radiator and stops circulation. Gradual pitting can perforate the metal piping, causing the boiler or radiators to rattle.
Limescale is caused by calcium and magnesium which is present in the water hard water areas having far more of these minerals than other parts of the country. Deposits of these minerals leave hard crusts in the system when the water is heated. This can also make the system noisy and inefficient, you will be paying for gas that does not heat your home.
Biological growth inside the system is another hazard that must be prevented. This tends to get into the system by open tanks. The biological growth advances rapidly in the form of a slimy lining. This material can really make your system under perform by clogging up the pipework.
Plenty of free help is available on the internet. Take out time to go through a few pages of free advice. Kick-start with the manufacturers and their web sites. You can find a list manufacturers and the popular items they carry in this site. You can also find a lot of really useful information and tips through forums as well as speaking to suppliers directly with any specific questions that you may have.
All the best with your water treatment, let energy conserving central heating and hot water with lower household bills rule.